Subscribe to this RSS feed
Short-term Floor Protection - A Product Guide

Short-term Floor Protection - A Product Guide

Your floors need special protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for other occasions past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors so that you could make knowledgeable selections on the very best product to use in your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embody common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and other inflexible protection. Protective supplies bought by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as four ft by 8 feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can usually leave adhesive residue when removed. Frequent paper protection products embody:

· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, waterproof and made from recycled paper.

· Kraft paper is a lightweight brown paper that is inexpensive but does not afford any impact protection and might easily tear

· Scrim paper might incorporate coatings or reinforcements to make them waterproof as well as scrim threads to reinforce the paper and forestall tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nonetheless they're additionally too thin to offer a lot impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The massive drawback of utilizing Rosin paper is that it might cause a permanent stain if the paper gets wet. Rosin paper can even rip simply so it not normally recommended for use

· Corrugated cardboard rolls or sheets can also be used to protect flooring. Corrugate provides impact protection however it just isn't coated with a waterproof end and must be kept dry at all times so that it doesn't disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping in order that they shouldn't be used on any floors which might be curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not offer any impact protection and are normally rated for brief time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor alternative in maintainable protection. Protection films are available in a variety of adhesion "tack". Hard surface protection films can have a decrease tack and color than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a lot of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the usual dimension of four toes by 8 ft and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/four inch to 3/4 inch thick. Both products provide impact protection on a wide range of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nevertheless they are bulky to hold and store. These wood sheets should be used on top of a softer protection similar to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not supply moisture protection and will be harder to cut to measurement than different protection types.

If you have any queries relating to where by and how to use temporary carpet protection, you can speak to us at our page.